Trikdis Equippment
We are growing technicians needed.
Supplied And Installed @ $650 Inc GST No On Going Cost, Free App , Unlimited Users.
Compatible with almost all alarm brands (one APP for all )
E16 is not just an Ethernet transmitter that sends messages to compatible security systems. It also transmits the command received over the internet to the system to arm/disarm protection mode.
Features:
Sends events to monitoring station receiver:
- Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
- Can send event messages to SIA DC-09 receivers.
- Connection supervision by polling to IP receiver every 30 seconds (or by user-defined period).
- The backup channel, that will be used if connection with the primary channel is lost.
- With parallel communication channels events can be sent to two receivers at the same time.
- When Protegus service is enabled, events are first delivered to CMS, and only then are sent to app users.
Works with Protegus app:
- “Push” and special sound notifications informing about events.
- Remote system Arm/Disarm.
- Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
- Remote temperature monitoring (with iO or iO-WL expanders).
- Different user rights for administrator and installer.
Notifies users:
- Users can be notified about events with Protegus app.
Quick setup:
- Settings can be saved to file and quickly written to other communicators.
- Two access levels for configuring the device for CMS administrator and for the installer.
- Remote configuration and firmware updates.
Supplied and Installed @ $650 inc GST No on going cost, Free App
Features:
SENDS EVENTS TO MONITORING STATION RECEIVER:
- Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
- Can send event messages to SIA DC-09 receivers.
- Connection supervision by polling to IP receiver every 10 seconds (or by user defined period).
- Backup channel, that will be used if connection with the primary channel is lost.
- When Protegus service is enabled, events are first delivered to CMS, and only then are sent to app users.
WORKS WITH PROTEGUS APP:
- “Push” and special sound notifications informing about events.
- Remote system Arm/Disarm.
- Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
- Different user rights for administrator, installer and user.
CONTROLLABLE OUTPUTS AND INPUTS:
- 2 input, selectable type: NC, NO, EOL=2.2 kΩ
- 1 output controlled via:
- Mobile/Web application
QUICK SETUP:
- Settings can be saved to file and quickly written to other communicators.
- Two access levels for configuring the device for CMS administrator and for installer.
- Remote configuration and firmware updates.
Contact Details
Phone Number
1300 23 00 23
Email
info@alarmdoctor.com.au
We Are Open
8:00 AM – 5:00 PM (Mon – Fri)
8:00 AM – 1:00 PM (Sat)
8:00 AM – 1:00 PM (Sat)
Book An Appointment